Battery Estimator

Select your module.

Enter the transmission interval in milliseconds. The default is 333mS which is three transmissions per second.

Enter the sample time in milliseconds. Increasing the sample time will improve the noise free resolution at the expense of battery life.

Enter the loadcell impedance in ohms or the current drawn by any external sensor in the case of a T24-VA or T24-IA.

Estimated number of hours per day the device is likely to be awake. Remember that when not in use the modules enter a very low current deep sleep mode.

Selecting a common battery type here will populate the usable battery capacity below.

Enter the usable battery capacity. This may not necessarily be the published capacity.

Optional time for an external sensor to start up. This is not required for load cells.