Wireless Telemetry Handheld Display Single Input (T24-HS)

This handheld wireless load indicator with a single input provides an 8 digit LCD reading from any of the T24 acquisition module
Quote / Price Request Ask an Engineer Downloads Share Play Videos
Introduction to T24 Range
Simple Pairing and Calibration

View more videos on
Our YouTube Channel !

Wireless load indicator handheld in leather case with clear viewing window fits all handhelds
  • Handheld wireless load indicator  for connection to a single T24 Acquisition Module
  • Two key operation offering tare functionality
  • Auto ‘power on’ and ‘power off’ of remote acquisition module
  • Water-proofed to IP65 NEMA 4
  • Simple wireless configuration and calibration
  • Up to 200m (650 ft) range
  • Photo on left showing the available T24-HS accessory black leather carry case with clear viewing window  shoulder strap

This Wireless Telemetry Handheld Display Single Input module provides an 8 digit LCD reading from any of the T24 Acquisition Modules (strain gauge, current , voltage, temperature, pulse and potentiometer). The remote acquisition module can be ‘powered on’ and ‘powered off’ automatically as the T24-HS handheld is operated. Status indicators inform the user if the remote acquisition module has input integrity problems, low battery, low signal, over range or other error.

The T24-HS display can be toggled between gross and a tared value and can optionally be scaled to change measurement units.

The licence free 2.4GHz direct sequence spread spectrum (DSSS) radio technology offers high integrity, error free communications which can co-exist with other wireless technologies such as Wi-Fi, Bluetooth® and Zigbee®. FCC, ETSI and IC approvals

This Wireless Telemetry Handheld Display Single Input  module uses a pair of standard alkaline AA batteries and is configured using free T24 Toolkit software which runs on a PC connected to a T24 base station.

The T24-HS handheld display is typically seen in applications requiring wireless loadcell measurement or wireless strain gauge display. To learn more about these applications please see our 'Industries' tab.
 

T24-HS

General Radio

Parameter Min Typical Max Units
Licence   Licence Exempt    
Modulation Method   MS (QPSK)    
Radio Type   Transceiver (2 way)    
Data Type   250   K bits/sec
Radio Frequency 2.4000     GHz
Power   1   mw
Range     200 (650) Metres (feet) *
Channels (DSSS)    16    
*Maximum range achived in open field site at height of 3 metres (9.8 feet) above ground.
Electrical    
Power Supply Voltage (Battery Life Calculator)  2.4  3.0  3.6  V DC
Power Consumption    
Active    35  40  mA
Low Power Mode    120  160  uA
Estimated Battery Life Using 2AA Batteries:
Standby mode (Powered off)    1.5    Years
Continuous Operation    40    Hours
Environmental    
IP Rating    IP65 / NEMA 4    
Operating Temperature  -10    +50  C
Storage Temperature  -40    +85  C
Humidity  0    95  %RH
CE Environmental Approvals European EMC Directive 2004/108/EC

 

 

  • product logo
  • product logo
  • product logo
  • product logo
  • product logo

Wireless load indicator handheld with a single input case dimensions

 

Documents

Software

  • T24 Toolkit : Version 1.2.49 This toolkit allows configuration, calibration and testing of the T24 range of 2.4GHz telemetry products.

Product order options

T24-HS Code
Digital Display for Single Input T24-HS
Accessories Code
Black leather case with clear viewing window with shoulder strap TR100-CA

These are the following industries and applications in which this product has been used:

Wireless Sensing Module for Load Cell, Strain Gauge Data Acquisition

Wireless Sensing Module for Load Cell, Strain Gauge Data Acquisition

T24-ACM
Radio Telemetry Module for Strain Gauge, 0-20mA, 0-10V Sensors

Radio Telemetry Module for Strain Gauge, 0-20mA, 0-10V Sensors

T24-ACMm
Wireless Telemetry USB Base Station

Wireless Telemetry USB Base Station

T24-BSu
Wireless Telemetry Radio Base Station

Wireless Telemetry Radio Base Station

T24-BSi
Q: What batteries are required?

A: 2 x AA, Alkaline, Zinc or Rechargeable NiCad, NiMH.

Q: Are they IP or NEMA rated?

A: Yes to IP65 NEMA4.

Q: What is the battery life of the handhelds?

A: 40 hours continuous use.

Q: What is the difference between the T24-HS, HA & HR handhelds?

A: The T24-HS provides easy one-to-one communication with a single acquisition module.
The T24-HA advanced provides communication with up to 12 acquisition modules providing both individual and resultant values, as well as the ability to transmit data to other output devices using the F1 function key.
The T24-HR roaming will acquire data from any number of acquisition modules in range, offering the most powerful (nearest) one for display first.

Q: What is the battery life of the handhelds?

A: 40 hours continuous use.

Q: Are they IP or NEMA rated?

A: Yes to IP65 NEMA4.

Q: What batteries are required?

A: 2 x AA, Alkaline, Zinc or Rechargeable NiCad, NiMH.

Q: What is the difference between the T24-HS, HA & HR handhelds?

A: The T24-HS provides easy one-to-one communication with a single acquisition module.
The T24-HA advanced provides communication with up to 12 acquisition modules providing both individual and resultant values, as well as the ability to transmit data to other output devices using the F1 function key.
The T24-HR roaming will acquire data from any number of acquisition modules in range, offering the most powerful (nearest) one for display first.

For more 'Frequently Asked Questions' please see our Knowledge Centre

Click here

Contact Us
e-Newsletter Sign Up

Keep up to date with our latest products, news and special offers


40 years