The T24-AO1 is a wireless receiver designed for desktop use, converting data from a single T24 transmitter module into a standard analogue signal. It is the ideal solution for integrating wireless measurements into bench testing, R&D setups, and desktop control systems.
The analogue output can be configured to one of the pre-calibrated voltage and current ranges, including 0–10 V, ±10 V, 0–5 V, ±5 V, 0–20 mA, and 4–20 mA. All current outputs can operate in either sink or source mode, ensuring compatibility with a wide variety of systems.
Housed in an IP50-rated desktop enclosure, the T24-AO1 supports fast data conversion with update rates of up to 2000 transmissions per second. The device is configured and scaled using the free T24 Toolkit software, which communicates wirelessly via a T24 base station. LED indicators provide clear visual feedback on radio link status, remote sensor condition, and battery life.
Operating on the licence-free 2.4 GHz DSSS frequency band, the T24-AO1 provides interference-resistant communication with a line-of-sight range of up to 100 metres (328 feet). For applications requiring extended range or harsh environmental protection, the T24-AO1i industrial version offers up to 800 metres (2,600 feet) with IP67-rated housing.
Typical Applications
-
Desktop measurement and test setups
-
Wireless-to-analogue signal conversion for bench instruments
-
R&D and laboratory data acquisition systems
-
Integration with desktop controllers and monitoring equipment
Module transmits and receives, offering:
-
Full error detection and correction
-
Configurable voltage and current outputs
-
LED indicators for link quality, sensor status, and battery life
-
Update rates of up to 2000 per second
-
Wireless configuration and scaling via T24 Toolkit software
-
2.4 GHz DSSS radio technology with up to 100 m line-of-sight range
Maximum range achieved in open field site with the receiver mounted at a height of 3 metres (9.8 feet) above ground. Specification at 3V supply at 25°C.
